The application range of glue is very wide, from the production of airplanes and ships to small clothes and toys. It can be said that as long as the glue reaches the place, then the glue dispensing process service is needed. Naturally, it is necessary to understand the common defects and solutions in the dispensing process, as follows:1. Wire drawing/tailing1.1. Wire drawing/tailing is a common de... View full text

If you are using dispensing accessories for the first time or you have found that the accessories you are using are not suitable, please refer to our suggestions.1. Four criteria:1. Smaller point-small dispensing needle, low pressure, short time2. Larger point-large dispensing needle, greater pressure, longer time3. Thick glue-oblique dispensing needle, high pressure, set time according to needs4.... View full text

What factors affect the dispensing quality of the dispenser? No doubt, friends who have been in contact with the dispenser know the size of the dispensing volume, dispensing pressure, needle size, the distance between the needle and the working surface, and the viscosity of the glue. , Glue temperature, curing temperature curve, bubbles in the glue and other factors all affect the dispensing quali... View full text

The Japanese-style dispensing syringe is a commonly used accessory in the dispensing industry. Whether it is an automatic dispensing machine or a manual dispensing machine, it is basically necessary to use the Japanese-style dispensing syringe as a dispensing accessory, even for a jet dispenser. You can use it, but Japanese-style dispensing syringes are consumables, and each use requires a lot of ... View full text